Pioneer DDJ-WeGO2 Operating Instructions Manual page 5

About the installation procedure
(Windows)
Do not connect this unit and the computer until installation is
completed.
! Log on as the user which was set as the computer's administrator
before installing.
! If any other programs are running on the computer, quit them.
1 Turn on the computer's power.
2 Insert the included CD-ROM into the computer's CD
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted,
open the CD drive from [Computer (or My Computer)] in the [Start]
menu, then double-click the [CD_menu.exe] icon.
3 When the CD-ROM menu appears, select [Install
Driver Software (Pioneer_DDJ_WeGO2_Driver_X.XXX)],
then click [Start].
4 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the VIRTUAL DJ LE software.
! When installing on Windows XP
If [Hardware Installation] appears on the screen while the installa-
tion is in progress, click [Continue Anyway] and continue with the
installation.
5 Select [Install VIRTUAL DJ LE(DDJ-WeGO2)] from the
CD-ROM's menu, then click [Start].
The VIRTUAL DJ LE installer is launched.
6 Once the VIRTUAL DJ LE installer is launched, click
[Next].
! To return to the previous screen: click [Back].
! To cancel installation: click [Cancel].
7 Read the contents of the [End-User License
Agreement] carefully, and if you agree, check [I accept
the terms in the License Agreement], then click [Next].
If you do not agree to the terms of the [End-User License Agreement],
click [Cancel] to cancel installation.
8 Select the type of installation for VIRTUAL DJ LE, then
click [Next].
! When [Typical] is selected, plug-ins and other components are
installed simultaneously. Normally select [Typical].
! When [Custom] is selected, you can select which components to
install.
9 When the screen below is displayed, click [Install].
Installation begins.
The message of successful installation appears once installation is
completed.
5
En