Advanced Operation; Using The Cue Function (Rg); Using The Loop Function (Rh); Using The Hot Cue Function (Ri) - Pioneer DDJ-WeGO2 Operating Instructions Manual

Advanced Operation

H
G
I

Using the CUE function (rG)

1 In the pause mode, press the [CUE] button to set a cue
point at the position at which playback is paused.
— When no hot cue is set at any of buttons [1] to [4], the cue point
is simultaneously set as hot cue [1].
— If hot cues have already been set, the hot cue last operated is
reset at the cue point position.
2 During playback, press the [CUE] button to return to
the last operated hot cue point and pause there (Back
Cue).
3 After returning to the cue point, keep pressing the
[CUE] button to continue playing (Cue Sampler).

Using the LOOP function (rH)

Manual looping
Loops with a maximum length of approximately 4 seconds can be
created.
1 During playback, press the [AUTO LOOP] control
while pressing the [SHIFT] button to set the loop in
point.
2 After the loop in point is set, press the [AUTO LOOP]
control while pressing the [SHIFT] button to set the loop
out point and start loop playback.
! When the [AUTO LOOP] control is pressed while pressing the
[SHIFT] button during loop playback, loop playback is canceled.
! When a manual loop is set after turning on [
screen, the loop out point is automatically set by adjusting the loop
length to be playable as auto loops (1/8 to 32).
! When a manual loop is set after turning off [
screen, [ < _ > ] is displayed on the [AUTO LOOP] window's beat
number display. To use the auto loop function after this, first cancel
manual loop playback, then turn the [AUTO LOOP] control clock-
wise or counterclockwise until the beat number display appears on
the [AUTO LOOP] window.
! If about 4 seconds pass after the loop in point is set, the set loop in
point is canceled.
16
En
J J H
G
I
] on the computer's
] on the computer's
Auto looping
1 During playback, turn the [AUTO LOOP] control to set
the length for loop playback in number of beats.
2 Press the [AUTO LOOP] control to start loop playback.
! The length of the loop can be changed by turning the [AUTO LOOP]
control during loop playback.

Using the HOT CUE function (rI)

With this function, playback can be started instantaneously from the
position at which a hot cue is set.
! Up to four hot cues can be set and stored per track.
1 During playback or in the pause mode, press a
[HOT CUE (DELETE)/SAMPLER] button to set a hot cue.
2 Press the [HOT CUE (DELETE)/SAMPLER] button at
which the hot cue is set to call out the hot cue.
! A previously set hot cue can be deleted by pressing the
[HOT CUE (DELETE)/SAMPLER] button while pressing the [SHIFT]
button.
! Hot cue operations can be performed when the [SAMPLER] button is
not lit.

Using the SAMPLER function (rI)

The sounds of up to 8 sampler slots can be operated in addition to deck
operations.
Press a [HOT CUE (DELETE)/SAMPLER] button to start
playback of the sampler slot.
On this unit, sampler slot operations can be performed when the
[SAMPLER] button is lit.
The [HOT CUE (DELETE)/SAMPLER] buttons on this unit and the sam-
pler slots in VIRTUAL DJ LE correspond as follows:
— [HOT CUE (DELETE)/SAMPLER] buttons on this unit's left deck:
Sampler slots 1 to 4
— [HOT CUE (DELETE)/SAMPLER] buttons on this unit's right deck:
Sampler slots 5 to 8
! Playback returns to the beginning of the sample and continues by
pressing the [HOT CUE (DELETE)/SAMPLER] button while pressing
the [SHIFT] button when the sample is playing.