Commands; Lock; Registering And Deregistering An Additional Cordless Handset Of The Original Type - Philips MF-JET 495 User Manual

Commands

Your device will fi le all transmission commands
(including faxes ready for polling or for delayed
sending) in a list known as the waiting queue.
Consulting or modifying list
Documents in the waiting queue may have the
following status:
TX—polling transmission
DOC—in deposit
POL—polling
in progress—ongoing commands
SMS—SMS transmission
Press M, 62 and OK. Use / to select a
document from the waiting queue and confi rm
with OK. Modify the parameters and confi rm
with OK.
Immediate transmission
Press M, 61 and OK. Use / to select the
document in the waiting queue and confi rm with
Y or OK to immediately perform the selected
fax or SMS transmission.
Cancelling a transmission
Press M, 63 and OK. Use / to select the
document in the waiting queue and confi rm with
OK.
Printing a document
Press M, 64 and OK. Use / to select the
document in the waiting queue and confi rm with
OK.
Print the waiting queue
Press M, 65 and OK. A list of the documents
queuing for transmission will be printed.

Lock

You can block access to the keypad for numbers
or to the whole keyboard of your MF-JET 495.
Entering the code
Enter a four-digit code. This code is also used to
cancel the keyboard lock.
1 Press M, 711 and OK.
2 Enter the four-digit interlock code and press
OK.
3 Enter the code one more time and press OK.
v When a code is already registered, the
machine asks you fi rst to give the old code
before allowing you to modify it.
Locking the keyboard
1 Press M, 712 and OK.
2 Enter the four-digit interlock code (see Enter-
ing the code) and press OK.
3 Use / to select WITH and press OK.
The access code must be entered each time the
machine is used.
v After each operation, the machine locks
automatically. To unlock the keyboard,
enter WITHOUT in step 3.
Locking numbers
You can also just lock the keypad for numbers
with a code. Transmissions are only possible
from numbers included in the directory.
1 Press M, 713 and OK.
2 Enter the four-digit interlock code (see Enter-
ing the code) and press OK.
3 Use / to select only direct. and press
OK.
v After each operation, the machine locks
automatically. To unlock the keyboard,
enter FREE in point 3.
Registering and deregis-
tering an additional
cordless handset of the
original type
Registering
Your cordless handset is set up at the factory for
your base station and does not have to be regis-
tered. You can register up to fi ve additional cord-
less handsets to your base station. For optimum
performance of all the functions you should only
register cordless handsets of the original type.
Original cordless handsets can be ordered using
the enclosed order form or contacting the call
center (see Ordering information).
39