Handset Settings; Activating Or Deactivating The Beeps; Modifying The Default Handset Melody Volume; Modifying The Handset Ringtone - Sagem D20T User Manual

LU 251619615_D20T_GB_SAGEM.book Page 15 Jeudi, 26. août 2004 4:54 16
H
ANDSET SETTINGS
H
ANDSET SETTINGS
Activating or deactivating the
beeps
On the navigator key , press
the HS SET screen is displayed, press OK to
confirm.
Select BEEPS using or
Select the beep type using
KEYPAD PRESS: the handset beeps when a
key is pressed.
BATTERY LOW: the handset beeps when
the battery is too low.
OUT OF RANGE: When the base station is
out of range, the handset will warn you
acoustically.
An information screen displays the beep
status (ON or OFF) for the selected item.
• To change the status, press
Press OK.
• To keep the status, press C.
To exit the menu, press the red key
Modifying the default handset
melody volume
On the navigator key , press
the HS SET screen is displayed, press OK to
confirm.
Select MELODY VOL using
OK.
There are seven alternatives in succession to
choose from: :
• VOL OFF : No ringing tone.
• VOLUME : X : From 1 to 5.
• CRESCENDO : The volume of the ring
tone increases with every ringing
sequence.
or until
Press
default volume. Once the volume is set,
press OK.
. Press OK.
To exit the menu, press the red key
or . Press OK.

Modifying the handset ringtone

This menu enables you to associate a
ringtone to incoming calls or internal calls
(intercom).
On the navigator key
the HS SET screen is displayed, press OK to
confirm.
Select EXTERNAL CALL or INTERNAL
or .
CALL using
Select the desired ringtone using
Press OK.
.
To exit the menu, press the red key

Setting the ear volume

or until
or . Press
15
or to increase or decrease the
, press or
or . Press OK.
During communication, you can
increase or decrease the audio
volume of your handset by pressing
the or key on the navigator.
.
until
or .
.