LU 251619615_D20T_GB_SAGEM.book Page I Jeudi, 26. août 2004 4:54 16 ONTENTS Introduction Modifying the language Modifying the date and time Recommendations and safety instructions Your telephone Modifying the voice box number Base settings Unpacking Modifying the default base ring volume Your base Modifying the base ringtone Your handset...
Furthermore, it efficiently uses the frequency spectrum attributed to ground and spatial communication to prevent damaging interference. The declaration of compliance may be looked up on the www.sagem.com site, section "support" or can be obtained from the following address:...
LU 251619615_D20T_GB_SAGEM.book Page 2 Jeudi, 26. août 2004 4:54 16 OUR TELEPHONE Unpacking Place the box in front of you, make sure it contains the following items: • one base, • one handset, • one battery compartment cover, • one equipped power adapter, •...
LU 251619615_D20T_GB_SAGEM.book Page 3 Jeudi, 26. août 2004 4:54 16 OUR TELEPHONE Your handset With its user-friendly design, you will appreciate how easy it is to hold and its quality during conversations. Speaker Display Phonebook key Navigator Hang up Pick up CID Review Redial (long press) Power ON/OFF...
LU 251619615_D20T_GB_SAGEM.book Page 4 Jeudi, 26. août 2004 4:54 16 OUR TELEPHONE The visual display of your handset on standby mode Menu indicator Message indicator in voice box Directory indicator Key lock indicator Absence calls indicator Handsfree Calls indicator Secrecy Battery indicator Range MENU...
LU 251619615_D20T_GB_SAGEM.book Page 5 Jeudi, 26. août 2004 4:54 16 OUR TELEPHONE Handset set-up Insert the batteries one after the other in compliance with the battery polarity, as shown on the label in the telephone set. Place the cover back on the handset by pushing upwards until it is completely closed.
LU 251619615_D20T_GB_SAGEM.book Page 6 Jeudi, 26. août 2004 4:54 16 OUR TELEPHONE Replacing the batteries Hold down the C key to turn off the telephone set. Turn it around so that the battery compartment is accessible. Take the handset, key side on your palm and on the battery cover make a pressure downwards.
LU 251619615_D20T_GB_SAGEM.book Page 7 Jeudi, 26. août 2004 4:54 16 ETTING STARTED Receiving a call ETTING STARTED When you receive a call your telephone Making a call rings. If you have subscribed to a "Caller display" service, the caller's information appears on the screen (unless your caller Direct dialling enabled...
LU 251619615_D20T_GB_SAGEM.book Page 8 Jeudi, 26. août 2004 4:54 16 ETTING STARTED Handsfree picks up, transfer the call by pressing the red While having a conversation with your contact, you can enable or disable the To retake the call before it is picked up by the handset loudspeaker.
You can view the 24 last received calls by handset is in the standby mode) by pressing pressing key. button on your D20T base. Calling the voice box All registered handsets will ring. You can stop each handset by pressing any key on the...
LU 251619615_D20T_GB_SAGEM.book Page 10 Jeudi, 26. août 2004 4:54 16 ENU STRUCTURE You can navigate through the menus using the keys. Press the OK key to access a higher menu. Press the C key to return to the previous menu. DIRECTORY HS SET BEEPS...
LU 251619615_D20T_GB_SAGEM.book Page 11 Jeudi, 26. août 2004 4:54 16 OUR DIRECTORY Select NEW by pressing the key. OUR DIRECTORY Press OK. You can store 25 numbers entries in your The name input screen appears. directory. Each directory entry can contain the name of Using the keypad keys, enter the name of your contact which can be a maximum of 12 your contact by pressing successively on the...
LU 251619615_D20T_GB_SAGEM.book Page 12 Jeudi, 26. août 2004 4:54 16 OUR DIRECTORY Deleting an entry Now, enter the name of your contact using the keypad keys. To enter the pause mode during dialling, On the navigator key , press until press the key until letter P appears.
LU 251619615_D20T_GB_SAGEM.book Page 13 Jeudi, 26. août 2004 4:54 16 ALL LOG ALL LOG The number at the end of the line shows the number of calls from the This menu enables you to view the received specified telephone number. and the dialled calls list.
LU 251619615_D20T_GB_SAGEM.book Page 14 Jeudi, 26. août 2004 4:54 16 ALL LOG If a number appears under the PRIVATE display or if it is exists in your directory, you will not be able to delete this number from the call log. Deleting a number from the call Press the key to access to the list of...
LU 251619615_D20T_GB_SAGEM.book Page 15 Jeudi, 26. août 2004 4:54 16 ANDSET SETTINGS There are seven alternatives in succession to ANDSET SETTINGS choose from: : • VOL OFF : No ringing tone. Activating or deactivating the • VOLUME : X : From 1 to 5. beeps •...
LU 251619615_D20T_GB_SAGEM.book Page 16 Jeudi, 26. août 2004 4:54 16 ANDSET SETTINGS Select CHANGE NAME using . Press On the navigator key , press until the HS SET screen is displayed, press OK to The current name will be displayed. Delete confirm.
LU 251619615_D20T_GB_SAGEM.book Page 17 Jeudi, 26. août 2004 4:54 16 ANDSET SETTINGS Enter the date in DD/MM format then the time in HH/ MM format and press OK. To exit the menu, press the red key Modifying the voice box number First, contact your service provider who will give you all information concerning the operation of your...
LU 251619615_D20T_GB_SAGEM.book Page 18 Jeudi, 26. août 2004 4:54 16 ASE SETTINGS Modifying the flash duration ASE SETTINGS (R key) Modifying the default base ring If you connect your telephone to a private volume automatic branch exchange or use it in a foreign country, you may need to modify the flash duration in order to use your telephone On the navigator key...
LU 251619615_D20T_GB_SAGEM.book Page 19 Jeudi, 26. août 2004 4:54 16 ASE SETTINGS Modifying the pause duration Modifying the base code If you connect your telephone to a private The base code (0000 being the default automatic branch exchange, you may need setting) is required to access certain security to modify the pause duration in order to use functions.
Page 22
LU 251619615_D20T_GB_SAGEM.book Page 20 Jeudi, 26. août 2004 4:54 16 ASE SETTINGS Select REINIT BASE using . Press Enter the base code. Press OK. To exit the menu, press the red key When you re-initialize the base, the base code becomes 0000 again.
EGISTRATION On the base: EGISTRATION Put the base to which you want to link the Two SAGEM D20 handsets can be telephone set in registration mode and press logged on to one base station. the base button for several seconds.
LU 251619615_D20T_GB_SAGEM.book Page 22 Jeudi, 26. août 2004 4:54 16 EGISTRATION Select SELECT BASE using . Press Select the base preference (indicated by the icon) using . Press OK. To exit the menu, press the red key De-registering a handset This function enables you to de-register a handset from your base.
D20T Base if this problem persists. Entries will not be accepted in Directory is full : the DIRECTORY. Up to 25 names and numbers can be stored in the D20T Directory. Delete some of the older entries to make more space for new one.
Page 26
Registration fail Wrong registration procedure: Make sure that you know your D20T system CODE. If you are registering a new handset to your D20T base, (refer to paragraph Registering a second handset to a base, page 21). Try again if possible.
Page 27
230 V , 50/60 Hz Handset dimensions 140 x 53 x 32 mm Charging time 6 hours Handset weight 140 g All of this data is provided to you for information purposes only. SAGEM SA reserves the right to make any changes without notice.
Preservation of the environment as part of a sustainable development logic is an essential concern of SAGEM SA. The desire of SAGEM SA is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.
Any and all Equipment which has required to be repaired during the above Warranty is thereinafter war- ranted (spare-parts and labour only) * by SAGEM until the later of (i) Expiry of the above warranty period set out above or (ii) three (3) months from the date on which SAGEM carried out the intervention.
Page 30
Equipment for any particular purpose. SAGEM's liability in respect of any claim by the Customer or any third party for direct loss or damage, whether arising in contract, tort or otherwise or from SAGEM's negligence or otherwise in respect of its supply or services shall not exceed the price paid by the Customer for the Equipment .
Page 31
LU 251619615_D20T_GB_SAGEM.book Page 29 Jeudi, 26. août 2004 4:54 16 ARRANTY The foregoing shall apply only for the UK. If any provision of this warranty shall be held to be in whole or in part invalid or illegal due to an obligatory rule applicable to consumers pursuant to English legislation, such invalidity or illegality shall not impair or affect the remaining provisions or parts of this warranty.
Note here the code which you have entered. User Manual Data subject to change without notice *251619615A* Société anonyme à directoire et conseil de surveillance au capital de 36.405.229 € - 562 082 909 R.C.S. PARIS 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE http://www.sagem.com...
Need help?
Do you have a question about the D20T and is the answer not in the manual?
Questions and answers