Table of Contents
Advertisement
H
ANDSET SETTINGS
H
ANDSET SETTINGS
Activating or deactivating the
beeps
On the navigator key
the HS SET screen is displayed, press OK to
confirm.
Select BEEPS using
Select the beep type using
KEYPAD PRESS: the handset beeps when a
key is pressed.
BATTERY LOW: the handset beeps when
the battery is too low.
OUT OF RANGE: When the base station is
out of range, the handset will warn you
acoustically.
An information screen displays the beep
status (ON or OFF) for the selected item.
•
To change the status, press
Press OK.
•
To keep the status, press C.
To exit the menu, press the red key
Modifying the default handset
melody volume
On the navigator key
the HS SET screen is displayed, press OK to
confirm.
Select MELODY VOL using
Press OK.
, press
or
until
or
. Press OK.
or
. Press OK.
or
.
.
, press
or
until
or
.
There are seven alternatives in succession to
choose from:
•
VOL OFF: No ringing tone.
•
VOLUME X: From 1 to 5.
•
CRESCENDO: The volume of the ring
tone increases with every ringing
sequence.
Press
or
default volume. Once the volume is set,
press OK.
To exit the menu, press the red key
Modifying the handset ringtone
This menu enables you to associate a
ringtone to incoming calls or internal calls
(intercom).
On the navigator key
the HS SET screen is displayed, press OK to
confirm.
Select EXTERNAL CALL or INTERNAL
CALL using
or
Select the desired ringtone using
Press OK.
To exit the menu, press the red key
16
to increase or decrease the
, press
or
. Press OK.
.
until
or
.
.
Advertisement
Table of Contents
