Connections; Introduction; Connection To Tv Set, Vcr And Antenna; Hi-Fi Amplifier - Sagem ITD 66 User Manual

Digital terrestrial tv receiver with photo card reader

Hide thumbs Also See for ITD 66:

Table of Contents

3. CONNECTIONS

There are several ways of connecting the Set Top Box to your audio/TV system. Some of the

methods enable you to listen to music in stereo sound of CD like quality.

Consult your local supplier for assistance in setting up an audio/video configuration best suited to

your unique requirements.

Warning:

Disconnect the Set Top Box from the mains before connecting or disconnecting any device to it.

Only connect your terrestrial antenna when the Set Top Box is unplugged.

The Set Top Box connects directly to your TV by a scart connector which includes RGB signals

to guarantee optimum image quality. Connect the supplied scart cable between the TV scart

connector of the Set Top Box and the main scart connector of the TV (the one with 3 points

indicating that RGB provision is available).

Then connect the Set Top Box (AUX scart connector) to your VCR or DVD player (main scart

connector on the VCR or DVD player). The scart cord is not supplied.

See Connection diagram page II.

Note:

ITD66 is not equipped with an RF modulator. You can't see digital programs via the RF cord on

another TV set.

You can connect your Set Top Box to your Hi-Fi amplifier (standard, with equalizer or even better,

Prologic) to obtain excellent listening comfort comparable to those of audio programs.

Volume adjustment is possible directly from your Set Top Box only on analog output.

Hi-Fi amplifier (Digital output)

Hi-Fi amplifier (Analog output)

Table of Contents