Connections; Introduction; Connection To Tv Set, Vcr And Antenna - Sagem ITD 602 User Manual

3. Connections

3. CONNECTIONS

3-1 INTRODUCTION

There are several ways of connecting the Set Top Box to your audio/TV system. Some of the methods
enable you to listen to music in stereo sound of CD like quality.
Consult your local supplier for assistance in setting up an audio/video configuration best suited to your
unique requirements.
Warning:
Disconnect the Set Top Box from the mains before connecting or disconnecting any device to it.

3-2 CONNECTION TO TV SET, VCR AND ANTENNA

Only connect your satellite antenna when the Set Top Box is unplugged.
The Set Top Box connects directly to your TV by a scart connector which includes RGB signals to
garantee optimum image quality. Connect the supplied scart cable between the TV scart connector of
the Set Top Box and the main scart connector of the TV (the one with 3 points indicating that RGB
provision is available).
Then connect the Set Top Box (VCR scart connector) to your VCR (main scart connector on the VCR).
The scart cord is not supplied.
RF in
Note:
This model is not equipped with an RF modulator. You can't see digital programs via the RF cord on
another TV set.
10
Ch03.p65
BLEU PANTONE 293C
RF out
(not supplied)
10
VCR
RF in
(not supplied)
(not supplied)
DIGITAL
27/03/03, 15:23
Terrestrial
antenna
(not supplied)