Table of Contents
Advertisement
5. ADVANCED BOX SETTINGS
5-1 PRELIMINARY / INSTALLATION CODE
Your Set Top Box is supplied ready to use for a standard configuration.
TV
: 4/3 format, RGB
VCR : PAL
Access to the installation screens shown below will enable you to adapt your Set Top Box to your
favourite equipment.
Generally, access to set up in main menu is obtained by pressing the MENU key.
You can memorise your selections by pressing the
Return to the previous screen by pressing the BACK key.
Exit from all the screens by pressing the EXIT key.
Use cursor
line and press
Access to the installation menus is protected by a
secret installation code to avoid any unintentional
misadjustment.
Your Set Top Box is supplied with default code 1234.
Note: you will not be prompted to enter any code as
long as the installation code is 0000.
Enter your code.
As soon as each value is entered, the segment is repla-
ced by a star.
Using cursor
of the remote control unit, you can
come back to a value that has already been
entered and modify
it provided the code has not been confirmed by
After entering the four digits press
An error message will be displayed if the code you have
entered is not correct.
to move down to the INSTALLATION
to confirm.
to confirm.
key.
MAIN MENU
TIMER PROGRAMMING
TECHNICAL INFORMATION
INSTALLATION
PHOTO VIEWER
INSTALLATION
ENTER YOUR INSTALLATION CODE
THEN PRESS OK TO CONFIRM
.
MAIN MENU
ENTER YOUR INSTALLATION CODE
THEN PRESS OK TO CONFIRM
7
- - - -
* * * *
BAD CODE
PLEASE TRY AGAIN
Advertisement
Table of Contents
