Updating The Software - Sagem DTR6700T User Manual

DTR6400T_6700T_9 avril 07 EN.book Page 42 Jeudi, 10. avril 2008 2:38 14

12. UPDATING THE SOFTWARE

Software updates of the receiver are regularly available for download to provide you with new features.
The software can be updated using the network when a new version is available. In this case, the new
version will be broadcasted in the channel data.
The receiver automatically checks if an update is available and then asks you to accept, to postpone until
the next wake up or to refuse the download.
• If you accept, the receiver starts the update procedure, which can take from 5 to 30 minutes. During
this time the receiver is not available:
- the screen becomes black,
- the display indicates the download phases (0 to 4),
- you cannot carry out any operation during the process (for 5 to 30 minutes).
Once the process is complete, the receiver switches on automatically. After the automatic restarting
of the receiver, press the
watched.
• If you refuse, the receiver will propose again the download at next wake up.
Please check on www.sagem.com if a new user manual is available online.
key to exit the welcome screen and to return to the last programme
- 42 -