Recording List - Sagem DTR6700T User Manual

DTR6400T_6700T_9 avril 07 EN.book Page 28 Jeudi, 10. avril 2008 2:38 14
10-3-2 Programming a recording using the programme guide
Press the key to access the electronic programme guide.
Select the channel and the programme to record (to know how to navigate in the guide, see "Electronic
programme guide", page 20).
Once the programme is selected, press the
The programme then appears framed in red.
To cancel the programming, press the
You can view and modify the recording settings in the Recording timers menu (see "Recording
programmes using the menu", page 25).

10-4 RECORDING LIST

To access the recordings list, press the
You can also access it by pressing
Your receiver is equipped with a hard disk (identified as HDD-V). You will be able to create folders to
organise your recordings, and control the disk space available.
The window on the left displays the existing
folders and recorded programmes.
To scroll over the list of folders and recordings
from one page to another, use the
keys.
Use the and keys to select a
folder or a recording.
To open a selected folder and access the
recordings that it contains, press the
To play the selected recording, press the
In reading mode, the following actions are available:
- use , , and to move within the recorded programme.
- press to stop and return to the recording list.
To close the recording list and exit this menu, press the
key.
key.
key.
, then by selecting RECORDING LIST
and
key.
key.
key.
- 28 -
.