Software Update - Sagem DTR94 HD Freesat User Manual

UG 253271393-A DTR94 HD Freesat UK.book Page 35 Mardi, 6. octobre 2009 10:03 10

10. SOFTWARE UPDATE

Your receiver automatically checks if new software is available for download and will ask you if you want
to accept, postpone until the next wake up or refuse the download.
You can also manually request that the receiver searches for new software upgrade in the RECEIVER
SETTINGS > RECEIVER UPGRADE menu.
When a new software is available for download, the following screen appears:
• To accept the download, press
The receiver will start downloading, which can
take from 5 to 30 minutes. You will not be able
to use the receiver until it has finished down-
loading:
- The screen goes black.
- The display shows the download phases
(0 to 4).
- Once the process is complete, the receiver
switches on automatically. Press the
key to go back to the last programme you
were watching.
• If you refuse the download (by pressing
Please check www.sagem-communications.com for new versions of this manual after the software is
updated.
.
), the receiver will ask you again regularly.
- 35 -