Managing Contents - Sagem DTR6700T User Manual

DTR6400T_6700T_9 avril 07 EN.book Page 36 Jeudi, 10. avril 2008 2:38 14

11-3 MANAGING CONTENTS

Press the key to confirm the selection of ah highlighted media file or folder.
To select several files and/or folders which are not continuous, select them and press the
selected element. Selected elements appear with a check-mark. To unselect an element, press again the
key.
To select a series of files and/or folders which are continuous, select the first element of the series then
press the key and hold for more than two seconds. Select the last element of the series then press
the key; all the elements located between the first and the last of the series are selected.
You can then carry out the following operations:
• to copy, delete or move the selected elements, press the
displayed on the screen.
This command enables you to copy or move files to another location within the same device, or from
one device to another (for example: external USB device to the hard disk of the receiver). It also
enables you to create new destination folders.
Do ensure that the destination device has sufficient disk space before
transferring your data.
• to rename a selected element, press the
Select using the or
to erase the name of the element then use the keys of the numeric keypad of the remote control to
enter the name.
For example, to enter the letter "a", press once the
kly the key , and so on.
Always use alphanumeric (numbers and letters) characters when you re-
name files and/or folders. Do not use special characters. The accepted
signs are ".", "_" and "-".
key and follow the instructions
key. The "Select the operation" window appears.
keys the "Rename" action and confirm with
key, to enter the letter "b", press twice quic-
- 36 -
key for each
. Use the key