Table of Contents
Advertisement
D
O
C
ESCRIPTION
F
ONNECTORS
Figure 2. The VDH9600's rear connections.
y
STEREO L/R OUTPUT (RCA Jacks)
Use a stereo RCA audio cable (not supplied) to connect
stereo audio from the VDH9600 to the Video Tuner or A/V
source switcher.
u
VIDEO OUT (RCA Jack)
Use an RCA video cable (not supplied) to connect video
from the VDH9600 to the Video Tuner, Monitor, or A/V
source switcher.
OWNER'S MANUAL/INSTALLATION GUIDE
i
STEREO L/R INPUT (RCA Jacks)
Use a stereo RCA audio cable (not supplied) to connect stereo
audio from an alternate A/V source to record using the
VDH9600.
o
VIDEO INPUT (RCA Jack)
Use an RCA video cable (not supplied) to connect video
signals from an alternate A/V source to record using the
VDH9600.
p
DC IN 12V (4-Pin Molex)
Use the supplied dc power cord (with cigarette lighter
end) to connect the VDH9600 to the vehicle's 12-volt
electrical system.
a
REMOTE SENSOR INPUT (3.5 mm Plug)
Install and connect the remote mount IR Sensor (included)
to the back of the VDH9600 when the player is hidden
away or mounted under a seat.
Advertisement
Table of Contents
