Precautions And Videocassette Use - Clarion VDH9600 Installation Manual

Videocassette player
Table of Contents

Advertisement

P
A
V
RECAUTIONS
ND
IDEOCASSETTE
Installation Precautions
• This unit operates on an automotive 12-volt negative
ground power source and requires additional mobile audio
and video components for proper operation.
• Before installation, disconnect the (–) negative lead from
the vehicle's battery.
• Use only supplied screws and hardware. Make sure all
connections and components are fastened securely.
• At the proposed installation site, make sure there is ade-
quate space to accommodate the unit's dimensions (and
mounting brackets) and provide adequate ventilation
(see Installation on page 14).
• Use extreme caution when drilling around electrical
wiring, brake lines, and fuel lines. Check clearances on
both sides of a planned installation surface before drilling
any holes or installing any screws. Always wear protec-
tive eyewear when using power tools.
U
• Use only high-quality RCA cables that are no longer than
SE
• When routing RCA cables, keep them away from power
• If a fuse needs replacement, use the same value as the
Operation Precautions
• Do not allow liquids or foreign objects to enter the unit or
• If the unit or remote control should become wet, turn off
OWNER'S MANUAL/INSTALLATION GUIDE
necessary for direct connections to other components in
the system. Extra-length audio and video cables can cause
signal loss and act as an "antenna" for noise.
cables and output speaker wires.
original. Do not substitute another rating.
remote control.
all power and let your authorized Clarion Pro Audio dealer
clean or service the equipment.
DO NOT ATTEMPT TO OPEN OR SERVICE THE
UNIT OR REMOTE CONTROL. THE INTERNAL
PARTS ARE NOT USER-SERVICEABLE. DOING
SO WILL VOID THE WARRANTY.

Advertisement

Table of Contents
loading

Table of Contents