(Cda-9815 Only); Download Data To The Head Unit - Alpine HDA-5460 Owner's Manual

i-Personalize TM Operation (CDA-9815 only)
On Alpine owner website you can access the automobile audio setting
data varying with types of cars and systems. With CDA-9815
connected, you can download customized audio setting data based on
this data base to the head unit using HDD.
For details, refer to ALPINE website.
TM
About i-Personalize
You can download data (from Alpine's website) to a HDD, and
download and store the data to the CDA-9815.
To start i-Personalize, access the URL below and follow the on-screen
instructions.
http://www.alpine.com or http://www.alpine-usa.com
Downloadable data
Parametric Data is memorized in Preset 6 of the
equalizer Parametric EQ Mode.
Time correction Data is memorized in Preset 6 of the
Time Correction Mode.
Crossover Data is memorized in Preset 6 of the
crossover mode.
The file name of download data shall be
"A_U*****.MP3."
A_U .MP3
Extender (fixed)
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.
• Data storage
Store the data in the HDD route directory.
• For details about procedures of download, see ALPINE's website.
• If a external audio processor is connected, data that is downloaded
cannot be used.

Download data to the head unit

Downloading is operated not from the main unit (HDA-5460) but
from the head unit (CDA-9815).
1
Load HDD containing the data in the main unit
HDA-5460.
If the HDD is already loaded, select the HDD mode.
(refer to page 6)
2
Press and hold -/J on the main unit for at least 2
seconds.
The mode switches to the download mode to show the
download confirmation screen.
3
Turn the Rotary encoder on the main unit to
select "OK," then press the Rotary encoder.
Data search of the HDD starts and the first file name is
displayed.
• Selecting "NG" will halt the download mode.
• If a file is not found by the data search, "NO FILE" is indicated.
• The "NO FILE" display will automatically disappear if no
operation is performed for 5 seconds.
4
Turn the Rotary encoder on the main unit to
select "DOWNLOAD," and then press the Rotary
encoder to start.
Data downloading starts.
The file currently shown in the display is downloaded.
If you want to download other files, select NEXT FILE to
call up file names.
CANCEL : Halts the download
DOWNLOAD : Starts the download
NEXT FILE : Searches the next file
5
When data download is finished successfully, the
confirmation screen is displayed for 5 seconds
and the download mode closes.
Successfully downloaded items are indicated as checked
boxes on the confirmation screen.
PARAMETRIC EQ data
The data is memorized in Preset 6 of Parametric EQ mode.
The memorized data settings in Preset 6 (Parametric EQ
mode) are automatically applied.
X-OVER (Cross over) data
The data is memorized in Preset 6 of X-OVER mode. The
memorized data settings in Preset 6 (X-OVER mode) are
automatically applied.
You cannot download the data if the setting of the 2WAY/
3WAY switch is not suitable for the data.
TIME CORRECTION data
The data is memorized in Preset 6 of the Time correction
mode. The memorized data settings in Preset 6 (Time
Correction mode) are automatically applied.
• When you download the data again, the data is overwritten in
Preset 6.
11
-EN