Advertisement
SPECIFICATIONS
Model name
Stitch type
Application
Max. sewing speed
Normal sewing speed
Needle gauge
Stitch length
Needle (standard)
Needle bar stroke
Number of pieces of thread used
Weight of the machine head
Lift of the presser foot
Top feed roller width
Feed adjusting method
Lubrication
Lubricating oil
Installation method
WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:
Needle gauge
6.4mm (1/4"
7.2mm (9/32"
MS3 5 8 0 S
Stitch type
Code
Standard
S
To order, please contact your nearest JUKI distributor.
Folder assembly
Description
3/32" folder
18-1/8" folder
5/32" folder
9-1/8" folder
Since the top of the folder is shorter than the standard one, the material can be handled with ease.
MARKETING & SALES H.Q.
✽ Specifications and appearance are subject to change without prior notice for improvement.
✽ Read the instruction manual before putting the machine into service to ensure safety.
✽ This catalogue prints with environment-friendly soyink on recycle paper.
MS-3580S 1SN
For medium- to heavy-weight materials: jeans, denim jackets, work uniforms, etc.
Main feed: Slide-type stitch-length adjusting method
Differential feed: Lever adjusting method
To be installed on the table by means of an auxiliary drive assembly MT03
Code
Roller configuration Code
F
Standard
G
Reverse teeth
Differential-feed
Code
Not provided
0
Provided
1
Various folder assemblies are available according to
the properties and weight of the material to be used.
Parts No.
Outlet dimension
40072322
2.4mm
40066942
3.2mm
40072324
4.0mm
40072328
3.2mm
8
2
1
-
-
, KOKURYO-CHO, CHOFU-SHI,
182
8655
TOKYO
-
, JAPAN
PHONE : (
81
)
3
3480
2357
2358
-
-
,
FAX : (
81
)
3
3430
4909
-
-
http://www.juki.com
3-needle, 6-thread, double chainstitch machine
4,500rpm
3,500rpm
6.4mm, 7.2mm
2.1mm
3.6mm (standard 3.2mm)
UY130GS (standard) /Nm140 ( 22)
33mm
6
23.5kg
Max. 9mm (at the time of delivery 6.5mm)
11.9mm
Automatic rotary-pump type oiling
JUKI MACHINE OIL No. 18
S
R
N
Roller width
Code
11.9mm
N
Application
Medium-weight materials
Medium- to heavy-weight
materials (standard)
Extra heavy-weight materials
Medium- to heavy-weight
materials
MS-3580S 0SN
Without the differential feed capability
OPTIONS
Auxiliary drive assembly
To install the machine on the table,
the auxiliary drive MT03 is required.
JTMS5
Table stand
Table stand for the MS-3580 (without casters)
This table stand is specifically designed
for the SC-510.
The M-51 motor should be used.
SEPTEMBER, 2008 Printed in Japan(C)
MT03
Advertisement
