Diamond View DV159 Manual page 19

Auto
Exit
Enter
(decrease) Reduce the value of a setting. Move the selection cursor to the
(increase) Increase the value of a setting. Move the selection cursor to
To manually adjust the image:
1. Display the adjustment test pattern. This is the best way to observe changes
as you adjust the image. Windows users should run the Auto.exe test pattern
program provided on the Utilities floppy diskette. For non-Windows operating
systems, you can use the test pattern described in the previous section or
another full-screen image, for example the desktop of the operating system.
2. Open the OSD menu by pressing the Enter button on the monitor.
3. Press or
4. Press or
5. Check the current setting. Increase or decrease the sampling clock to get the
optimum picture. Look at the centre section of the test pattern that has
Auto
Auto
Automatically adjusts the vertical position, pixel phase,
horizontal position and pixel clock.
Return to the main menu or exit the OSD menu without saving.
Press the exit key when the OSD is not displayed to adjust the
audio volume.
Enter sub-menus, select items, save changes.
left. Press to adjust Contrast if the OSD is off.
the right. Press to adjust Brightness if the OSD is off.
to select the Geometry submenu and then press Enter.
to select Clock and then press Enter.
DIA MON D V IE W
Exit Enter
Exit Enter
15