Selecting Tones - Roland JUNIO-Gi Quick Manual

Selecting Tones

What is a Tone?
Each Live Set has four "Layers" (Upper 1, 2, Lower 1, 2), and a "Tone"
is assigned to each of these Layers .
A tone is the lowest-level unit of sound; you can't play a tone by
itself .
1. Hold down the [SHIFT] button and press the [SPLIT] button .
The LAYER/SPLIT screen will appear .
To switch each layer on/off , hold down the [SHIFT] button
and press the [1]–[4] buttons .
2. Use the cursor buttons to move the cursor to the Tone Number fi eld of the tone you want to change, and then use
the VALUE dial to select the desired tone number .
MEMO
• When you move the cursor to the tone number fi eld and press the [ENTER] (LIST) button, the tone list will appear .
• In the tone list screen, you can hold down the [PREVIEW] button to audition the tone .
• In the LAYER/SPLIT screen, you can also use the VALUE dial to change the tone group, tone type or volume (LEVEL) of each tone .
3. Press the [EXIT] button to return to the previous screen .
Reference
For details, refer to page 25 in the Owner's Manual .
* If you've edited the settings, be sure to save the live set (p . 4) .
8
Live Set
Layer: Lower 1
Layer: Lower 2
Tone
Layer Layer Tone Tone Tone Tone
Switch Number Group
Setting the Octave for Each Layer
In the LAYER/SPLIT screen, you can press the OCTAVE [DOWN]
button or [UP] button to raise or lower by an octave the key
range of the layer at the position of the cursor .
Layer: Upper 1
Layer: Upper 2
Tone Tone Volume Volume
Type (LEVEL)