Setting The Clock; Listening To A Compact Disc; Selecting A Track; Searching For A Specific Music Passage On A Cd - Samsung MM-J4 Instruction Manual

Setting the Clock

GB
our system is equipped with a clock which allows you to turn
your system on and off automatically.
You should set the clock:
When you first purchase the micro-component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing Standby/On (
2
Press TIMER /CLOCK twice.
Result: CLOCK is displayed.
3
Press PROGRAM /SET.
Result: The hour flashes.
4
To...
Decrease the hours ..............................................
Increase the hours ..............................................
5
When the correct hour is displayed, press PROGRAM /SET.
Result: The minutes flash.
6
To...
Decrease the minutes ......................................
Increase the minutes ...........................................
7
When the correct time is displayed, press PROGRAM /SET.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing TIMER /CLOCK once.
MUTE
2
1
TUNER
TIMER/CLOCK TIMER ON/OFF
BAND
AUX PROGRAM/SET REP. A B
MO/ST
SLEEP EQ/S.BASS TAPE SPEED
3,5,7
REV.MODE SHUFFLE COUNTER RESET
CD

Listening to a Compact Disc

Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
1
Press the CD(
2
Open the CD door by pushing on the top of the main unit marked
PUSH OPEN ( ).
Result: The CD door is opened.
3
Place the CD on the compartment so that the CD label faces upward.
4
Close the CD door.
Result: Number of tracks and the total playback time are shown on
the display.
5
Press the CD(
10
Press...
Press...
SLEEP EQ/S.BASS
REV.MODE SHUFFLE
CD
VOLUME
TUNING
REPEAT
TA P E
)button on the main unit and select CD.
) button to playback.
6 Adjust the volume according to needs with the following procedures.
Press the VOLUME+,- button or turn the VOL. + or – knob .
7
If it is desired to pause while the playback is processing, press the
CD(
8
To stop playback, press the Stop (
)

Selecting a Track

You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
Next track .....................................................................
Current track .................................................................
Previous track ................................................................
Track of your choice ......................................................
TAPE SPEED
COUNTER RESET
TUNING
MODE
4,6
+10
4,6
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a
specific music passage on a track.
To search through the tracks...
Forwards .........................................................
Backwards .........................................................
It is recommended that you turn the volume down before using
this function.
) button.
Press the CD( ) button once again to play back again.
) button.
1,5,7
8
CD
VOLUME TUNING
Press and hold down...
CD
VOLUME
TUNING
.
6
Press...
once
once
twice
or the
appropriate number of
times.
for at least one second
for at least one second