Working With Detergents; Taking A Break - Kärcher G3200XH Operator's Manual

Detergents can only be applied with the black
detergent nozzle.
STEP 1:
Install the black detergent nozzle for detergent
application at low pressure.
STEP 2:
Fill the detergent tank with Kärcher detergent.
Close the detergent tank with the detergent
mattering cap .
STEP 3:
Connect detergent suction tube by firmly
inserting into pressure washer's pump.
CAUTION
This unit has been designed for use with cleaning
detergents recommended by the manufacturer.
The use of other cleaning detergent may affect the
operation of the machine and void the warranty.
Always Use Kärcher Detergent for Best Results
Kärcher biodegradable detergents are specially
formulated to protect the environment and your
pressure washer. The special formula won`t clog
the suction tube fi lter and will protect the internal
parts of the pressure washer for a longer life. For
Kärcher Detergents, check your retailer or visit
our website:
www.karcherresidential.com
STEP 1:
Move the engine stop switch to the OFF position.
For engine details see engine manual.
10 English

WORKING WITH DETERGENTS

Detergents
TAKING A BREAK ...fi ve minutes or more
STEP 4:
Adjust the detergent metering valve to the
desired dosage.
STEP 5:
With the engine running, pull trigger to operate
unit. Liquid detergent is drawn into the unit
and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
STEP 6:
Always draw fresh water through the deter-
gent suction tube when the cleaning job is
done, to rinse/fl ush any remaining detergents
from the injection system.
For best results see Cleaning Tips for specifi c
information on how to clean different surfaces.
CAUTION
Never use:
– Bleach, chlorine products or other corrosive
chemicals
– Liquids containing solvents (i.e., paint thin-
ners, gasoline, oils.)
– Tri-sodium phosphate products
– Ammonia products
– Acid-based products
These chemicals will harm the unit and will damage
the surface being cleaned.
Use of these items will void the warranty.
STEP 2:
Release trigger and engage safety lock.