Listening To The Radio - Sharp QT-V5H Operation Manual

Listening to the radio

QT-V5H
ENGLISH
Aerial adjustment
For FM broadcasts, raise and extend the telescopic rod aerial, then adjust the posi-
tion and length for the best reception. For AM, simply move or rotate the unit for the
best sound (the telescopic rod aerial does not affect the reception).
FM
E-25
" Tuning
1
Press the ON/STAND-BY switch on the main unit to turn the power on.
2
Press the TUNER/BAND button repeatedly to select the desired fre-
quency band (FM or AM).
FM stereo mode
3
Press the
Manual tuning:
Press the TUNING
the desired station.
Auto tuning:
When the TUNING
scanning starts automatically and the tuner stops at the first receivable broadcast sta-
tion.
Notes:
! When radio interference occurs, auto scan tuning may stop automatically at that point.
! Auto scan tuning will skip weak signal stations.
! To stop the auto tuning, press the TUNING
When the FM stereo mode is selected:
! "STEREO" will appear when an FM broadcast is in stereo.
AM
! If the FM reception is weak, press the TUNER/BAND button to select the FM monaural
mode. The reception changes to mono, and the sound becomes clearer.
04/6/14
FM monaural mode
or button to tune in to the desired station.
or ( or ) button as many times as required to tune in to
or ( or ) button is pressed for more than 0.5 seconds,
or ( or ) button again.
Disappear
QT-V5H_SEEG_E4.fm
AM mode
FM stereo receiving in-
dicator
9HX80432100007