To Start Playback From The Desired Point (Direct Play); Cd Operation; To Play In The Desired Order (Programmed Play) - Sharp QT-V5H Operation Manual

! To start playback from the desired point
(direct play)
This function is only available on the remote control.
To select and play the desired track:
When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 21).
In the stop or playback mode, press the direct number buttons to se-
lect the track number.
TV screen
SELECT:
If the track number is 2 digits or more, press "+10" and enter the number.
Example:
To select track 14, press "+10" and "4".
Notes:
" Direct play feature is disabled on some discs.
" Some discs cannot play from the specified point.
To play by specifying time (time search):
When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 21).
1
Whilst playing the desired track, press the GOTO button.
GO TO __ : _ _
2
Specify the time with the direct number buttons.
" Enter minutes and seconds.
" To specify 3 minutes and 30 seconds, enter "0330".
" If you enter the wrong number, start over from step 1.
Notes:
" Time search is not possible across tracks.
" Time search feature is disabled on some discs.
" Time search feature is not available on MP3 and JPEG discs.

CD operation

The following playback functions are the same as DVD or VCD opera-
tions.
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
To locate the beginning of a chapter/track (skip) . . . . . . . . . . . . . . . . . . . . . . . 15
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
To play the contents between the specified points repeatedly (A-B repeat) . . . . . 18
To change the audio language (audio output) . . . . . . . . . . . . . . . . . . . . . . . . . 19
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

To start playback from the desired point (direct play) . . . . . . . . . . . . . . . . . . . 22

! To play in the desired order (programmed
14
You can play back the desired tracks in a specific order.
Maximum of 99 tracks can be programmed.
When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 21).
1
2
3
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents are cleared when you perform the following
operations:
" Open the disc tray.
" Set the unit to the stand-by mode.
Notes:
" Programming is not possible in the pause or playback mode.
" Sequential programming does not work if the disc disables programming or does not
" During programmed play, repeat play can be performed by pressing the 1/ALL REPEAT
" For MP3 discs, programmed play is not available.
play)
In the stop mode, press the PROGRAM but-
ton.
Enter a track number with the direct number
buttons.
" Repeat the procedure above to enter other track numbers.
" If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
" If the track number is 2 digits or more, press "+10" and enter the number.
Example:
To select track 14, press "+10" and "4".
Press the PLAY/PAUSE / button to start play.
have track information.
button (see page 17).
04/6/14 QT-V5H_SEEG_E4.fm
QT-V5H
ENGLISH
Page
TV screen
PROGRAM P00:00
PROGRAM P01:02
E-22
9HX80432100007
D
F
S
V
I
N
P
E