Samsung VACUUM CLEANER Operating Instructions Manual page 6

OPTION
Adjust the inlet lever according to the
floor surface.
OPTION
Vacuum dust in wide area at once
Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to
OPTION
matters tangled around the drum. In this case, clean the drum with care.
1
Push the Open button of
the transparent screen
cover to separate the cover.
4
For improved pick-
up of pet hair and
fibre on carpets
Remove dust inside the
brush housing using a
dry duster or crevice tool.
OPTION Clogs on turbine keeps brush from turning, and in this case, take care of it.
Remove waste
Brush for blanket
matter com-
pletely when
For picking up pet hair
inlet is blocked.
and fibre on upholstery
Warning : Use for bedclothes only. Be cautious not to damage brush during unclogging.
and bed linen.
Carpet
Cleaning
Floor
Cleaning
2
Remove the brushbar
from the transparent
screen.
5
Insert brushbar into
rotating belt and
assemble.
Turbine
Turn the lock button to
'UNLOCK', and remove
waste matter.
5
Remove waste matter completely if the
inlet is blocked.
Remove waste matter completely
if the inlet is blocked.
3
Remove waste matter
such as dust and hair
tangled around the
brushbar using scissors.
6
Click the transparent
screen cover back into
place to reassemble.
Brush
To reassemble, align the cover to the
front of the main body and close. After
closing the cover, ensure that the lock
button is turned to the 'LOCK' position.