Removing The Hard Disk From The Secondary Hdd Bay - Clevo P170EM Service Manual

Disassembly

Removing the Hard Disk from the Secondary HDD Bay

Figure 6
Note that the secondary hard disk (if installed) is located under the optical device bay (CD/DVD).
Secondary HDD
Assembly Removal
1. Turn off the computer, and turn it over, remove the battery
2. Remove screws
a. Remove the screws from
3. Slide the secondary HDD assembly in the direction of the arrow
the secondary HDD as-
4. Lift the secondary HDD assembly
sembly.
b. Slide the secondary HDD
a.
assembly in the direction
of the arrow.
c. Lift the secondary HDD
assembly up and out of
the bay.
b.

. Hard Disk Assembly
• Screws
2 - 10 Removing the Hard Disk from the Secondary HDD Bay
- from the secondary HDD assembly
1 3
up and out of the bay (in the reverse direction of the arrow
5
6
1
2
3
4
(page 2 - 5) and optical device (page 2 -
(Figure 6a ) .
(it will not move fully out of the bay
4
c.
5
5
9).
)
Figure 6a .
Figure 6c ) .
4