Settings
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
MOVE
ENTER
RETURN
STOP
(Con't)
1
In Stop mode, press the MENU button.
Press the Cursor % button to move to <Audio> and then press the ENTER button.
Press the Cursor % button to move to <TEST TONE> and then press the
ENTER button.
`
The test tone will be sent to L ; C ; R ; SR ; SL ; SW in order.
EXIT
If the ENTER button is pressed again at this time, the test tone will stop.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
EXIT