Table of Contents
Advertisement
Channel Setup Table
Dip Switch NO.
1
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
OFF
ON
ON
ON
•
Make sure to set the same channel for main unit. Main unit and microphone should have same channels to enable
transmission and reception between them.
•
Use alkaline battery for power as much s possible. Ordinary battery may cause shorter service life of microphone
and main unit and may deteriorate the performance.
•
Make sure to turn off the power switch before inserting the batteries, and check the polarity (+)(-) of battery when
inserting the battery.
•
If you drop the battery in the water accidentally during use, immediately turn off the power switch and contact the
A/S center.
•
RF noise may occur in the area near railroad, power line and big motor where high voltage runs and EMI noise
occurs.
•
Since the internal parts of device are manufactured precisely, do not disassemble it as you want.
•
Make sure to remove and keep the batteries in safe place, if you do not use it for long period of time.
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Dip Switch NO.
ch1
ch2
ch3
ch4
ch5
ch6
ch7
GB
Advertisement
Table of Contents
