Connecting the FM Antenna
1
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall
or other rigid surface.
•
This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
6 6
Please observe the following cautions for your safety.
`
Make sure the unit is well-ventilated. If the unit has poor ventilation, the
temperature inside the unit may rise and may damage it.
`
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes
are covered with a newspaper or cloth, heat may build up inside the unit and fire may
result.)
FM Antenna (supplied)