Connecting and Preparing Your TV
Checking Parts
Owner's Instructions
Screw (4ea)
(PS50B550 only)
Ferrite Core (Power Cord, Headphone)
N
The ferrite core is used to shield the cable from interference. When connecting a cable, open the ferrite
core and clip it around the cable near the plug.
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on the floor
N
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
transparent stand.
Remote Control/
Power Cord
AAA Batteries (2ea)
Cover-Bottom
Cover-Bottom /
(PS50B550 only)
Screws (2ea)
(PS58B550 only)
Cloth-Clean
Ferrite Core for
Power Cord
English - 4
Holder-Ring (4ea)
Holder-Wire Cable
(Refer to page 40)
Ferrite Core fo
Headphone
-0° ~ 0°