Source List / Edit Name - Samsung Plasma TV User Manual

Source List / Edit Name

Source List
❑
Use to select TV or other external input sources such as DVD players or Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of
your choice.
TV, AV1, AV, Component1, Component, PC, HDMI1, HDMI/DVI, HDMI3,

HDMI4, USB.
You can choose only those external devices that are connected to the TV. In the
N
Source List, connected inputs will be highlighted and sorted to the top. Inputs that
are not connected will be sorted to the bottom.
PC always stays activated.
N
Using the Colour buttons on the remote with the Source list
N
- Red (Refresh): Refreshes the connecting external devices.
- T TOOLS (Tools): Displays the Edit Name and Information menus.
Press the SOURCE button on the remote control to view an external signal source.
O
TV mode can be selected by pressing the TV button, number buttons (0~), and the
P < / > button on the remote control.
Edit Name
❑
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV /

Blu-ray / HD DVD / DMA
You can name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920x1080@60Hz is connected to the HDMI IN  (DVI) port, you should set the HDMI/DVI
N
mode to PC in the Edit Name of the Input mode.
When connecting an HDMI/DVI cable to the HDMI IN (DVI) port, you should set the HDMI/DVI mode to DVI or DVI PC in the
N
Edit Name of the Input mode. In this case, a separate sound connection is required.
English - 5
Source List
Edit Name