Connecting And Preparing Your Tv Checking Parts; Using The Stand-Base; Assembling The Cables - Samsung Plasma TV User Manual

Connecting and Preparing Your TV
Checking Parts
Owner's Remote Control/
Instructions AAA Batteries (2ea)
Cover-Bottom /
Screws (2ea) (PS50B550 only)
(PS58B550 only)
Ferrite Core (Power Cord, Headphone)
N
The ferrite cores are used to shield the cables from interference.
when connecting a cable, open the ferrite core and clip it around the cable near the plug.

Using the Stand-Base

Two or more people should carry the PDP. Never lay the PDP on the floor
N
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N

Assembling the Cables

Enclose the cables in the Holder-wire Cable so that the cables are not visible through the
transparent stand.
Power Cord
Cover-Bottom Screw (4ea)
(PS50B550 only)
Cloth-Clean
Ferrite Core for
Power Cord
(Not available in all locations)
English - 4
Holder-Ring (4ea) warranty Card/
(Refer to page 36) Safety Guide Manual
(Not available in all locations)
Ferrite Core for Holder-wire Cable
Headphone
-0° ~ 0°