Mp3/WmaPlayback; Ipod®/Iphone®Operation - Jensen MP1516 Owner's Manual

MP3/WMAPlayback

To play MP3/WMA files from a SD card, remove the faceplate and insert a SD card
into the SD Memory Card Slot on the housing. The unit will start playing MP3/
WMA files on the SD card memory automatically when the faceplate is installed.
If the MP3/WMA files are stored in folders on the SD card, the unit will start by
playing the first song in the first folder. After playing all the files sequentially in the
first folder, the unit will play sequentially all of the files in the next folder. The unit
will continue playing through all of the folders on the SD card in this manner.
If the SD card has loose files and folders containing files, it will play the loose files
sequentially, then it will play the files in the folders sequentially.
iPod®/iPhone®OPERATION
ConnectyouriPod
Connect your iPod or iPhone with the original iPod cable (supplied with the iPod).
This unit can play all audio from an iPod or iPhone up to the iPhone 4S and iPod
Touch 4G. The iPad is not supported.
Play/Pause
Once the unit has been connected, playback will start automatically. During
playback, press the "
BrowsingyouriPod
1. Press the F/PS
2. Rotate the volume knob to cycle through "PLAY LIST", "ARTIST", "ALBUM",
"GENRE", "SONGS", "COMPOSER", "AUDIO BOOK", and "PODCAST". The listing is
the same as your iPod's listing.
3. Press the volume knob to confirm your desired category.
4. Rotate the volume knob for further selection and press the volume knob to
confirm.
DetachingyouriPod
Unplug your iPod cable from the USB port anytime to eject the iPod.
" to play, pause or resume play.
button. "PLAY LIST" will appear on the display panel.
MP1516
35