Mp3/WmaPlayback; Selecting A Track - Jensen DMR2116 Owner's Manual

DMR2116

MP3/WMAPlayback

To play MP3/WMA files from a USB flash memory, insert a USB flash memory into
the USB port on the left side of the unit. The unit will start playing MP3/WMA
files on the USB flash memory automatically. ID3 information will be displayed
automatically on the display panel.
If the MP3/WMA files are stored in folders on the USB drive, the unit will start by
playing the first song in the first folder. After playing all the files sequentially in the
first folder, the unit will play sequentially all of the files in the next folder. The unit
will continue playing through all of the folders on the USB drive in this manner.
If the USB drive has loose files and folders containing files, it will play the loose
files sequentially, then it will play the files in the folders sequentially.
Pausing or Resuming Playback
Press the 1/ (Play / Pause) button to pause playback. "PAUSE" appears on the
display panel. Press the 1/ (Play / Pause) button again to resume playback.
Fast Forward or Fast Reverse
Press and hold the button to fast forward.
Press and hold the button to fast reverse.

Selecting a Track

Toselectthenextorprevioustrack:
Press the button once to advance to the next track.
Press the button once to go to the previous track.
Toselectatrackdirectly:
Press AS/PS button. The track number appears on the display panel.
1.
2. Rotate the volume knob to select the track number in this folder.
3. Press volume knob to play back the track.
Scanning Tracks/Introduction Mode
Press the 2INTRO (Introduction) button to play the first ten seconds of each
track. "INT" and the track number appears on the display panel. Press the 2INTRO
button again to cancel the function.
29