Troubleshooting - Jensen DMR2116 Owner's Manual

TROUBLESHOOTING

Before going through the checklist, the check wiring connections. If any of the
problems persist after checking the list, contact your nearest service dealer.
Problem Cause
No power. • The car ignition switch is
• The fuse is blown.
No sound. • The volume is at minimum.
• The wiring is not properly
The • The built-in microcomputer
operation
keys do not
work.
The radio • The antenna cable is not
does not
work.
The radio • The signals are too weak.
station
automatic
selection
does not
work.
File You have files with Digital
information Rights Management( DRM).
shows in
display
panel but
will not play.
not on.
connected.
is not operating properly
due to noise.
connected.
DMR2116
Solution
• If the power supply is
connected to the car
accessory circuits, but the
engine is not running, switch
the ignition key to "ACC".
• Replace the fuse. Make sure
the amperage matches the
specified value.
• Adjust the volume to a desired
level.
• Check the wiring connection.
• Press the RESET button.
• The faceplate is not properly
installed.
• Insert the antenna cable
firmly.
• Select a station manually.
Contact the vendor for proper
use.
35