Table of Contents
Advertisement
STEP 3
(See Diagram 3)
A.) Attach the Leg Developer (#25) to the Leg Developer Holder (#5). Secure it with an Axle
(#27), two
¾" Washers (#70), and two M10 x 1" Allen Bolts (#59).
B.) Insert one M8 x 2 1/8" Allen Bolt (#63) through the hole on the Lat bar Frame (#22) and
secure it with a M8 Aircraft Nut (#68).
C.) Slide the Weight Post (#23) onto the Lat Bar Frame (#22). Insert the Lat Bat Frame into the
top opening on the Leg Developer Holder. Use the M18 Lock Knob (#26) to secure the Lat
Bar.
7
DIAGRAM 3
Advertisement
Table of Contents
