Impex OLYMPIAN Owner's Manual page 7

STEP 2 (See Diagram 2)
A.) Attach the Leg Developer Holder (#5) to the Front Stabilizer (#21). Secure them with three
M10 x ¾" Allen Bolts (#58) and
B.) Slid the Sliding Block (#17) onto the Main Seat Support (#6). Use a M18 Lock Knob (#26) to
hold the Sliding Block in position.
C.) Attach the Leg Developer Holder (#5) to the front of the Main Seat Support (#6). Secure
them with one M10 x 2 ½" Carriage Bolt (#55) from the top, two M10 x 2 ¾" Carriage Bolts
(#54) on the side, three
D.) Attach the Rear of the Main Seat Support to the Cross Brace (#3). Secure them with two
M10 x 2 ½" Carriage Bolts (#55),
¾" Washers (#70).
¾" Washers (#70), and three M10 Aircraft Nuts (#67).
¾" Washers (#70), and M10 Aircraft Nuts (#67).
6
DIAGRAM 2