Assembly Instruction - Impex MARCY MWB-500 Owner's Manual

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable and Allen Wrenches.
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Plug two 3" End Caps (#33) to the bottom openings on the Main Seat Support (#1).
B.) Connect the Left & Right Upright Beams (#2 & #3) by a Cross Brace (#4) in the Mid-span.
Secure them with two M10 x 3 ¾" Carriage Bolts (#38), one Bracket (#15), two
Washers (#41), and two M10 Aircraft Nuts (#45) on each end of the Cross Brace.
C.) Attach the Main Seat Support (#1) to the Cross Brace (#4). Secure it with two M10 x 3 ¾"
Carriage Bolts (#38), one Bracket (#15), two
Nuts (#45).
D.) Place the Backrest Adjustment Bar (#8) onto a selected holder on the Upright Beams to
obtain desired incline of Backrest.
E.) Slide the Left & Right Bar Holders (#10 & 11) onto the Upright Beams (#2 & 3) from the
top. Secure each Bar Holder with a M18 x
F.) Plug four 3" End Caps (#17) into the openings on the bottom of the Upright Beams.
¾" Washers (#41), and two M10 Aircraft
3/8" Lock Knob (#37).
4
¾"
DIAGRAM 1