Impex CB-202 Owner's Manual page 8

STEP 3 (See Diagram 3)
A.) Attach the side-holes on the two Backrest Supports (#7) to the pivot on the Main
Seat Support (#3). Place the other end of the Backrest Supports rest against the
Backrest Adjustment Bar (#10).
B.) Attach the Backrest Board (#9) to the Backrest Supports (#7). Secure it with four M6
x 1 3/8" Hex Bolts (#25) and Ø ½" Washers (#28).
C.) Place the Seat Pad (#8) onto the Main Seat Support. Secure it with four M6 x 5/8"
Hex Bolts (#26) and Ø ½" Washers (#28).
DIAGRAM 3
7