FITTING AND REMOVAL OF BASE
Put the monitor on a stable surface. The monitor may cause injury or damage if it falls
CAUTION
or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
B Hold the monitor and push the Stand-Base.
<Removal>
A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
B Press and hold the hooks inside, and pull the Stand-Base.
Stand-Base
Hook
BEFORE YOU OPERATE THE MONITOR 5