Radyne QAM256 Installation And Operation Manual page 66

QAM256 Digital Video Modulator and Upconverter
Common Query Opcodes
Opcode: <2000h>
Query response:
<1> Modem ID
Opcode: <2001h>
Query response:
<1> Modem control mode
Opcode: <2002h>
Query response:
<1> Version
Opcode: <2003h>
Query response:
<16> Firmware
Opcode: <2004h>
Query response:
<1> Hour
<1> Minute
<1> Second
Opcode: <2005h>
Query response:
<1> Year
<1> Month
<1> Day
Opcode: <2006h>
Query response:
TM077 – Rev. 4.0
Command Modulator Framing
Command Modulator Interleaver
Command Modulator Roll off
Command Modulator Interface
Type
Command Modulator Data
Polarity
Command Modulator Clock
Polarity
Command Modulator Clear
Alarms
Command Modulator Alarm Mask
Command Modulator PRBS
Command Modulator BB
Loopback
Command Modulator TX Power
Command Modulator TX Enable
Command Modulator TX Carrier
Command Modulator Channel
Table
Command Modulator Channel
Query a modulator's identification
(QAM256 modulator's ID = 32)
Query a modulator's control mode
(0=Front Panel, 1=Terminal, 2=Computer, 3 = Ethernet)
Query a modulator's Firmware version.
(implied decimal point)
Query a modulator's Firmware information.
(8 bytes for firmware part number.)
(8 bytes for release date.)
Query a modulator's time.
(0 through 23)
(0 through 59)
(0 through 59)
Query a modulator's date.
(0 through 99)
(0 through 11)
(0 through 30)
Query a modulator's time and date combined.
Remote Operations
<2246h>
<2247h>
<2249h>
<224Ah>
<224Bh>
<224Ch>
<224Dh>
<224Eh>
<224Fh>
<2251h>
<2253h>
<2254h>
<2255h>
<2260h>
<2261h>
C-
11