Manual Transport; Bypass Linkages - Husqvarna MZ28T Operator's Manual

Manual Transport

WARNING!
No adjustments or maintenance
should be carried out unless:
• the engine stopped
• the ignition key removed
• the parking brake activated

Bypass Linkages

When pushing or pulling the mower, engage the
IZT (Integrated Zeroturn Transaxle) bypass linkages
with the hydro release levers. The levers are located
on each side of the rear of the unit below the rear
engine plate.
Raise the deck to the highest (transport) position.
Pull the release levers up and out of the keyhole
slots. Release the lever with the head outside the
bracket and held into the bypass setting (OPEN).
To reengage (CLOSE) the IZTs to drive, reverse the
above procedure.
OPERATION
1. IZT locked into the bypass position
2. Linkage lever, engaged
Right side, IZT linkage
2
1
Husqvarna-
8065-061
33