Troubleshooting Guide; Technical Service - Heath Zenith SL-4190 Series User Manual

Motion sensing diecast lantern
Hide thumbs Also See for SL-4190 Series:
Table of Contents

Advertisement

Available languages

Available languages

SYMPTOM
POSSIBLE CAUSE
1. Light switch is turned off.
Light will not
2. Bulb is loose or burned out.
come on.
3. Fuse is blown or circuit
4. Daylight turn-off is in effect
5. Incorrect circuit wiring, if this
Light comes
1. Light Control may be in-
on in daylight.
2. Light Control is in Test. (Set
Please call 1-800-858-8501 for assistance before returning product to store.
If you experience a problem, follow this guide.You may also want to visit our Web site at: www.desat-
ech.com. If the problem persists, call* for assistance at 1-800-858-8501, 7:30 AM to 4:30 PM CST
(M-F). You may also write* to:
DESA Specialty Products™
P.O. Box 90004
Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information available: Model Number, Date
of Purchase, and Place of Purchase.
This is a "Limited Warranty" which gives you specific legal rights. You may also have other rights
which vary from state to state or province to province.
For a period of five years from the date of purchase, any malfunction caused by factory defective
parts or workmanship will be corrected at no charge to you.
Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence,
light bulbs, batteries, and other expendable items are not covered by this warranty. Unauthorized
service or modification of the product or of any furnished component will void this warranty in its
entirety.This warranty does not include reimbursement for inconvenience, installation, setup time,
loss of use, unauthorized service, or return shipping charges.
This warranty covers only DESA Specialty Products™ assembled products and is not extended
to other equipment and components that a customer uses in conjunction with our products.
THISWARRANTYISEXPRESSLYINLIEUOFALLOTHERWARRANTIES,EXPRESSORIMPLIED,
INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR
THATTHEPRODUCTSAREFITFORANYPARTICULARPURPOSEORUSE,ANDSPECIFICALLY
IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE
SHALL BE NO LIABILITY ONTHE PART OF DESA SPECIALTY PRODUCTS™ FOR ANY SPECIAL,
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO
ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or
provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. Proof of purchase is required for warranty claims.

TROUBLESHOOTING GUIDE

breaker is turned off.
(recheck after dark).
is a new installation.
stalled in a relatively dark
location.
control switch to an ON-
TIME position.)

TECHNICAL SERVICE

No Service Parts Available for this Product
FIVE YEAR LIMITED WARRANTY
SYMPTOM
POSSIBLE CAUSE
Lightcomeson
1. Light Control may be sens-
fornoapparent
reason.
Light stays
1. The sensor is pointed toward
on continu-
ously.
Light flashes
1. Light Control is in the Test
on and off.
6
ing small animals or au-
tomobile traffic (Reduce
sensitivity).
a heat source like an air vent,
dryervent,orbrightly-painted
heat-reflective surface.
(Reduce sensitivity.)
mode and warming up.
(Flashing is normal under
these conditions).
595-5628-07

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF