Table of Contents
Advertisement
• Shut Down the Server's Hardware - The Shutdown
• Restart the Server's Software - The Restart Software
• Shut Down the Server's Software - The Shutdown
Perform a Server Action
1. Click the radio button corresponding to the Server Action
2. Click the Apply button to display the warning screen.
3. To proceed with your selection, click the Restart or Shut-
NOTE: When the Restart Software or Hardware option is
selected, the Server will take five to 10 minutes to reboot. After
this time, you can go to another screen or log off.
8
6 T
, E
E
ECHNOLOGIES
NTERPRISE
A
DMINISTRATOR
ware Restart process, files normally FTPed to the Server
are routed to a problem directory in the logging device.
When the Server is running again, these files are FTPed
to the Server.
Hardware option should only be selected if the Server's
hardware must be completely shut down—for example, if
the Server box will be physically relocated. When this
option is selected, the Server box shuts off, and files
normally FTPed to the Server will be routed to a problem
directory in the logging device. When the Server is
rebooted, these files will be FTPed to the Server.
option should be selected if daemons fail to run and/or
the database needs to be started again. When this option
is selected, the MySQL database is rebooted.
Software option should be selected if a software update
needs to be installed on the Server. When the Shutdown
Software option is selected, the MySQL database shuts
off and no files are FTPed to the Server.
you wish to execute.
down button on the warning screen. To change your
selection, click the Back button of the browser window to
return to the Shut Down screen.
R
A
EPORTER
DMINISTRATOR
S
C
2: C
ECTION
HAPTER
U
G
SER
UIDE
ER S
ONFIGURING THE
ERVER
47
Advertisement
Table of Contents
