Clean Tub Program - Samsung WA90GP User Manual

SOAK PROGRAM
It can be used to wash very dirty laundry.
Power
1. Press the Power button to "On".
2. Press the Soak button .
You may change the soak time with use the Soak button.(from 10 min. to 60 min.)
3. Press the Start/Pause button.
Water level is selected automatically.Washing rinsing, and spinning follow.
4. Close the lid.

CLEAN TUB PROGRAM

Use this course to clean the tub. It will keep the tub clean and sanitary.
Power
1. Press the Power button to "On".
2. Press the Clean tub button once.
Clean Tub and Soak lamp is turn on, at same time.
Water level is set to high level.
3. Press the Start/Pause button.
4. Add a delicated detergent and close the lid.
CAUTION
DELAY START PROGRAM
Select this course when you have to go out or do something else.
Power
1. Press the Power button to "On".
2. Press the Delay Start button once.
You may change the delay start time with use the Delay Start button.(from 3 hours to 18
hours)
3. Press the Start/Pause button.
Put the proper amount of detergent into the detergent box.
4. Close the lid.
The washing finishes by the time you reserved.
WA90GP-DC68-02572C-EN-00.indd 13
Program
Start
Soak
Pause
Program
Start
Clean Tub
Pause
- Never place laundry in the tub when cleaning inner tub, as this can cause
discoloration or damage to the laundry.
- When washing the laundry after cleaning the tub, you may find some impurities. These
are just detergent residues and impurities after the tub cleaning. Perform the rinse
cycle two to three times.
- Please purchase special detergent to clean tub.
Program Delay Start
Start
Pause
washing a load of laundry _13
2009-4-30 14:07:16