Tub Clean - Samsung WA10J7750G Series Manual

Maintaining your washer

Tub clean

TUB CLEAN Auto Indicator function
46 English
WA7700J_WA10J7750GW-03520M-01_SA.indd 46
TUB CLEAN is a self-cleaning cycle that
removes mold that may occur inside the
washer.
1. Press Power.
2. Select TUB CLEAN.
Once TUB CLEAN is selected, the only
function that can be set is Delay End.
3. Press Start/Pause.
TUB CLEAN begins.
CAUTION
• Using TUB CLEAN, you can clean the
drum without using a cleansing agent.
• Never use TUB CLEAN when laundry is
in the washer. This may cause damage
to the laundry or a problem with the
washer.
• If the TUB CLEAN indicator is lit after
a wash, it indicates that tub (drum)
cleaning is required. In this case, remove
the laundry from the washer, turn
the power on, and clean the drum by
running TUB CLEAN.
• If you do not run TUB CLEAN, the
TUB CLEAN indicator turns off. However,
the TUB CLEAN indicator will light
again after two washes. Not running
TUB CLEAN at this point will not cause a
problem with the washer.
• Although the TUB CLEAN indicator
is lit once a month or so, the frequency
may differ depending on the number of
times the washer is used.
2016/1/11 16:48:21