Mapping An Input To An Output Zone; Mapping An Input To An Output Zone With Breakaway Options - Zektor HDA800 User Manual

Mapping an input to an output zone

HDMI: A
SRC: 00[03]00 00 00 00

Mapping an input to an output zone with breakaway options

HZ: A-AA 1-1A 2-2A 3-3A
HS: 0-00[4]01 0-00 5-14
To map any source (input) to any zone (output):
If the LCD display is not at showing the main menu press the MENU button.
To change the Audio mappings:
Use the SELECT knob to select the "Map Audio Input /Output" option: AudSw
To change the HDMI mappings:
Use the SELECT knob to select the "Map HDMI Input /Output" option: HdmiSw
To change the HDMI mappings with audio/video breakaway:
While in the HdmiSw screen, press the BACK button.
The BACK button is used to flip between the normal HDMI switching screen, and the HDMI with
audio/video breakaway screen.
When using the HdmiSw with breakaway screen, the 1st (single digit) source is the HDMI video
channel. The 2nd (two digit) source is the HDMI audio channel. For instance in the above display
HDMI zone 3's video channel is set to source 5, the audio channel is set to source 14.
12
1 2 3 4
MENU
SELECT
5
BACK
MENU
SELECT
BACK
HDA800(V2) User Guide, Version 1.3, 9/12/13
Using the Front Panel
ZONE
SETTING
NEXT
ZONE
SETTING
NEXT