Selecting The Sound Mode - Samsung CS29Z47 Owner's Instructions Manual

Picture - Mode
Mode: Dynamic/ Standard/
◆
T V
Movie/Custom
Mode
Contrast
You can select the type
Brightness
Sharpness
of picture which best
Colour
corresponds to your viewing
Tint
Colour Tone
requirements.
▼ More
You can select these options
◆
simply by pressing the
P.MODE button on the remote control.
Contrast/Brightness/Sharpness/Colour/Tint(NTSC
◆
only)
The television has several settings which allow you to
control the picture quality.
Colour Tone: Cool/Cool/Normal/Warm/Warm
◆
➢
Warm1,Warm2 can be selected only when the TV is
in the Movie mode.
Reset
◆
You can return to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard or Movie.).
Picture - Digital NR
Digital NR
◆
T V
If the signal received by
▲ More
Size
the television is weak, you
Digital NR
can activate this feature
Tilt
Reset
to reduce any static and
ghosting that may appear on
the screen.
Tilt
◆
If you find that the picture received is slightly titled to one
side, you can adjust the title setting(-7 to +7).
Size
◆
You can select a picture size among Normal/Zoom/Wide.
Sound -
Mode / Equalizer /
Picture
Auto Volume / Pseudo Stereo /
: Dynamic ►
100
Turbo Sound / Half Mute
45
75
55
G 50 R 50
: Cool1 ►
Mode: Standard/Music
◆
Move Return
Enter /Movie/Speech/Custom
You can select the type
of special sound effect to
be used when watching a
given broadcast.
➢ You can select these
options simply by pressing the S.MODE button on the
remote control.
Equalizer
◆
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
Auto Volume
◆
Each broadcasting station has its own signal
conditions,and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel
by lowering the sound output when the modulation
signal is high or by raising the sound output when the
modulation signal is low.
Pseudo Stereo
◆
This feature converts a monaural sound signal into
two identical left and right channels. Once the Pseudo
Stereo is set to On or Off, these settings apply to the
Picture
sound effects such as Standard, Music, Movie, and
Speech.
: Normal ►
: Off ►
: 0
: OK ► Turbo Sound
◆
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can
Move Return
Enter
enjoy more magnificent and dynamic sound when
watching music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
Half Mute
◆
You can reduce volume to half and control volume even
in the mute mode.
Method:
ENTER : On/Off
T V Sound
Mode : Standard ►
Equalizer ►
SRS TS XT : Off ►
Auto Volume : Off ►
Turbo Sound : Off ►
Pseudo Stereo : Off ►
Half Mute : Off ►
Move Enter Exit
English - 7

Selecting the Sound Mode

(depending on the model)
The DUAL I-II button displays/
P.MODE S.MODE
controls the processing and
SOURCE
output of the audio signal. When
power is switched on, the mode
DUAL
is automatically preset to either
"Dual-I " or "Stereo", depending on the current transmission.
NICAM Stereo
◆
Type of broadcast On-screen indication
Regular broadcast
Mono
(Normal use)
(Standard audio)
Regular +
Mono
NICAM Mono NICAM ↔
Stereo
NICAM Stereo
↔
NICAM
Dual-I Dual-II
NICAM Dual-I/II
↔
NICAM NICAM
A Stereo
◆
Type of broadcast On-screen indication
Mono
Regular broadcast
(Standard audio) (Normal)
Bilingual or Dual-I/II
Dual-I ↔ Dual-II
Stereo Stereo
↔
➢ ◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode,
connect to the "AUDIO-L" input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.
STILL P.SIZE
SIZE
SWAP
TURBO POSITION P
Mono
(Normal)
Mono
(Normal)
Mono
↔
(Normal)
Mono
(Forced mono)