Selecting The Sound Mode (Depending On The Model) - Samsung SP43T8 Owner's Instructions Manual

BP68-00457A(J60B_Euro_ENG)
Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual I " or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual I/II
Stereo
Stereo
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
2004/12/28 01:22 PM
(depending on the model)
On-screen indication
Mono (Normal use)
NICAM ↔
Mono (Normal)
NICAM ↔
Stereo (Normal)
NICAM → NICAM → Mono
Dual I Dual II
Mono (Normal use)
Dual I ↔ Dual II
Stereo ↔
(Forced mono)
Page 43
Mono
Mono
(Normal)
Mono
English - 43