Selecting The Sound Mode; Switching The Sound Off Temporarily - Samsung CS-21K9ML Owner's Instructions Manual

ENG

Selecting the Sound Mode

Switching the Sound Off Temporarily

22
(depending on the model)
The "S.MODE I-II" button displays/controls the processing and
output of the audio signal. When power is switched ON, the mode
is automatically preset to either "Dual-I" or "STEREO", depending
on the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
➣
N If the receiving conditions deteriorate, listening will be
easier if the mode is set to the "MONO" position using
the S.MODE I-II button.
N If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the
"MONO" mode.
N When receiving mono sound in the AV mode, connect to
the "L" input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
S.MODE I-II button.
You can switch the sound off temporarily, for example you may
wish to answer the telephone.
1
Press the MUTE
Result: The sound is switched off and "
2
When you wish to turn the sound back on at the same volume as
before, press the MUTE
buttons).
On-screen indication
MONO (Normal use)
↔
MONO
NICAM
STEREO
NICAM
¡
Dual-I Dual-II
NICAM NICAM
MONO (Normal use)
↔
Dual-I
STEREO
button.
" is displayed.
button again (or either of the volume
MONO
(Normal)
↔
MONO
(Normal)
¡
MONO
(Normal)
Dual-II
↔
MONO
(Forced Mono)