Selecting The Sound Mode - Samsung CW28V55V Owner's Instructions Manual

ENG
Get user manuals: See SafeManuals.com

Selecting the Sound Mode

The "I-II" button displays/controls the processing and output of the
audio signal. When power is switched ON, the mode is
automatically preset to either "Dual-I" or "STEREO", depending on
the current transmission.
NICAM
Stereo
A2
Stereo
24
(depending on the model)
On-screen indication
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
STEREO
NICAM Stereo
NICAM
Dual-I
NICAM Dual-I/II
NICAM
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
STEREO
Stereo
If the receiving conditions deteriorate, listening will be
easier if the mode is set to the "MONO" position using
the "I-II" button.
If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the
"MONO" mode.
When receiving mono sound in the AV mode, connect to
the "L" input jack on the panels. If the mono sound
comes out only from the left speaker, then press the "I-II"
button.
MONO (Normal use)
MONO MONO
NICAM (Normal)
MONO
(Normal)
Dual-II MONO
NICAM (Normal)
MONO (Normal use)
Dual-I Dual-II
MONO
(Forced Mono)